| Type |
CS-600A/B (A,B are for different testing port diameters) |
| Illumination |
d/8(Diffused lighting, 8 degrees observe angle)、SCI(specular reflection included)/SCE(specular reflection excluded)simultaneous measurement。(conform to CIE No.15、ISO 7724/1、ASTM E1164、DIN 5033 Teil7、 JIS Z8722 Condition c standards) |
| Size of integrating sphere |
Φ40mm,Avian diffused reflection surface coating |
| Illumination Light source |
CLEDs(entire wavelength balanced LED light source) |
| Sensor |
dual light path sensor array |
| Wavelength range |
400-700nm |
| Wavelength interval |
10nm |
| Half spectral width |
5nm |
| Reflectivity range |
0-200% |
| Reflectivity resolution |
0.01% |
| Observation angle |
2°/10° |
| Measurement light source |
A,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12,DLF,TL83,TL84,NBF,U30,CWF |
| Data being displayed |
SPD distribution/data，sample's color values，color difference values/graph，pass/fail results，color error tendency，color simulation，display measurement area，history data color simulation，manual input standard sample，generate measurement report |
| Measurement time interval |
0.5 seconds |
| Measurement time |
1 second |
| Test Aperture |
Type A: 10mm, Type B: 4mm, 6mm |
| Color space |
CIE-L*a*b, L*C*h, L*u*v, XYZ, Yxy, Reflectance
Hunterlab,Munsell MI,CMYK,RGB,HSB |
| Other colorimetric indices |
WI(ASTM E313-10,ASTM E313-73,CIE,ISO2470/R457, AATCC, Hunter, Taube Berger, Ganz, Stensby)； YI(ASTM D1925，ASTM E313-00,ASTM E313-73)；Tint(ASTM E313,CIE,Ganz)
Metamerism index Milm, Stick color fastness, Color fastness |
| Repeatability |
color values;ΔE*ab<=0.03(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals),
Maximum：0.05 |
| Battery capacity |
rechargeable, 10000 continuous tests, 7.4V/6000mAh |
Contact Now
