| Type |
CS-810 |
| Illumination |
d/0(Diffused illumination, 0°viewing)
SCS optical engine(light splitting and integration system),( 63694572, conform to CIE No.15, ISO 7724/1, ASTM E1164,DIN 5033 Teil7, JIS Z8722 Condition c standards) |
| Size of integrating sphere |
Φ40mm,Alvan diffused reflection surface coating |
| Illumination Light source |
CLEDs(entire wavelength balanced LED light source) |
| Sensor |
dual light path sensor array |
| Wavelength range |
400-700nm |
| Wavelength Pitch |
10nm |
| Half Band Width |
5nm |
| Reflectance Range |
0-200% |
| Reflectance Resolution |
0.01% |
| Observer Angle |
2°/10° |
| Illuminants |
C，D50，D55，D65，D75，F1，F2，F3，F4，F5，F6，F7，F8，F9，F10，F11，F12，CMF,U30,DLF,NBF,TL83,TL84,ID50,
ID65,LED-B1,LED-B2,LED-B3,LED-B4,LED-B5,LED-BH1,LED-RGB1,LED-V1,LED-V2 |
| Data being displayed |
Transmittance graph/value, chromatic value, color difference values, color assessment results, color tendency, history color value simulation, manual input standard sample, generate measurement reports |
| Measurement time interval |
1 second |
| Measurement time |
1 second |
| Color spaces |
CIE-L*a*b,L*C*h,CIE-L*u*v, XYZ, Yxy, Transmittance, Hunter-lab |
| Color difference formulas |
ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc(2:1), ΔE*cmc(1:1), ΔE*94, ΔE*00
ΔE*ab (Hunter) |
| Other indices |
WI(ASTM E313-10,ASTM E313-73,CIE,ISO2470/R457, AATCC, Hunter, Taube Berger, Ganz, Stensby),YI(ASTM D1925，
ASTM E313-00,ASTM E313-73),Tint(ASTM E313-00,CIE,Ganz) ,
APHA, Pt-Co, Gardner, Saybolt, Astm color |
| Repeatability |
Transmittance : standard deviation within 0.08%
Chromaticity values: Δ E*ab<=0.015(After calibration, standard deviation of 30 measurements on test white board, 5 second intervals, Maximum: 0.03) |
| Interface |
USB |
| Data Storage |
mass storage |
| Light source Lifetime |
5 years, 1.5 million tests |
| Size |
475*340*150mm(L*W*H) |
| Weight |
about 7kg |
| Work temperature range |
0~45℃, relative humidity 80% or below（ at 35°C ），no condensation |
| Storage temperature range |
-25℃ to 55℃，relative humidity 80% or below（at 35°C ）， no condensation |
| Standard accessories |
Power adaptor , color QC software, driving software, USB cable, black calibration tile, 40*10mm cuvette |
Contact Now
